How To Replace A Two Handle Roman Bathtub Faucet References

How To Replace A Two Handle Roman Bathtub Faucet References. Stop help line please do not return this product to the store. On knob style faucets, a plug button covers the screw to remove the handle.

Winslet Roman Tub Faucet Symmons from www.symmons.com

If your bathtub faucet is old or broken, you can easily replace it with a new one all by yourself. Then, pull straight up on the spout to remove it. Turn the hot and cold water supply valves off.

Begin By Grabbing Your Handy Little Flat Head Screwdriver And Carefully Applying Pressure To The Edges Of The Hot/Cold Button On The Front Of The Faucet Handle.

Inspect the interior of the valve body. Clean rust and debris off the tub deck before installing the new faucet. There is no complexity whatsoever.

Place A Rag Over The Spout And Adjust The Pipe Wrench's Mouth To Fit Over The Spout So It Locks Into Position As You Turn It Counterclockwise.

Then remove the faucet handle cover and loosen the screw underneath with an allen wrench. The handles must be assembled in in the off position. These do not have flexible hoses like a regular bathroom sink faucet.

Many Brands, Like The Moen Roman Tub Faucet, Will Follow A Similar Removal Procedure.

Stop help line please do not return this product to the store. There is no way to replace this from the top. After unscrewing the nuts from the two handles and the spout, you either lift all three components off the tub from above or lower the assembly down from below.

Then, Pull Straight Up On The Spout To Remove It.

Place the handle assembly on top of the faucet facing the off position. Use an allen wrench to loosen the screws until the handles are loose enough that you can slide them up and off the faucet. Step 3 use a wrench to turn the nuts that sit just below the handles counterclockwise until they back off the faucet assembly.

Unscrew This White Plastic Nut And Remove The Stem Extension/Handle Adapter.

How to replace your moen bathroom faucet handle. The process is extremely easy. Loosen the screw located on the back of the spout's base with a hex key.