How To Reset Maintenance Light On Toyota Corolla 2010 Ideas
How To Reset Maintenance Light On Toyota Corolla 2010 Ideas. Keep holding the trip reset button until the miles section of the odometer flashes zero. 1.turn the ignition switch to the “on” position.
At this point, the maintenance light will turn off. The reset can be performed by following these instructions:the “maintenance required” light should be off, and the computer will now begin accumulating miles from zero.then hold odo/trip reset button, then press the “ engine start stop button ” twice or turn ignition on only, don’t release the odo/trip button, until the resetting oil maintenance data or “ 000000 ” is. Keep holding the trip reset button until the miles section of the odometer flashes zero.
Table of Contents
If They Forgot To Do So, It’s A Pretty Easy Thing For You To Take Care Of On Your Own.
Vehicles with a smart key system: To reset the 2005 toyota corolla maintenance light, please follow these instructions: 2.while pressing the trip meter reset button, p.138 turn the engine start/ stop switch or engine switch on.
Keep Holding The Trip Reset Button Until The Miles Section Of The Odometer Flashes Zero.
5.while holding the trip pushbutton depressed, turn the ignition switch to the. This video shows u how to reset the maint req'd light after doing an oil change on a 2010 toyota corolla. Ensure odometer reading is shown.
The Reset Can Be Performed By Following These Instructions:the “Maintenance Required” Light Should Be Off, And The Computer Will Now Begin Accumulating Miles From Zero.then Hold Odo/Trip Reset Button, Then Press The “ Engine Start Stop Button ” Twice Or Turn Ignition On Only, Don’t Release The Odo/Trip Button, Until The Resetting Oil Maintenance Data Or “ 000000 ” Is.
Toyota recommends not to ignore the light and doing a series of inspections to prevent damages to the engine. If that doesn’t work, try repeating those steps. Usually, the technicians who work on your vehicle will reset the toyota maintenance required light after every service.
How To Reset Maintenance Light On Toyota Corolla 2010.
How to reset maintenance light on a 2010 toyota tacoma. Check out my gear on kit: Select total mileage on you odometer with the trip odo button.
Turn Your Vehicle’s Ignition To The Acc Setting While Holding The Button.usually, Service Technicians Who Service Your Vehicle Will Reset The Toyota Maintenance Light.usually, Service Technicians Who Service Your Vehicle Will Reset The Toyota Maintenance Light.
How do i reset the toyota maintenance light on my corolla? Turn the ignition to run (one position before starting engine). You take the service of a toyota dealership for the oil change, they will reset maintenance light toyota for yourself.